MONO® SILICONE MAX™ Premium Kitchen & Bath Sealant

Product Description:

MONO® SILICONE MAX™ is a premium performance 100% silicone sealant that provides 20 year mold & mildew resistance. It won’t crack or shrink, providing a durable, permanent 100% waterproof seal. MONO® SILICONE MAX™ is water resistant in 30 just minutes. Once cured, it is safe for incidental food contact. Ideal for a wide variety of kitchen and bath applications such as sealing around sinks, tubs, showers, back splashes, countertops and fixtures. Backed by a Lifetime Guarantee.

Features & Benefits:

    • 100% Silicone
    • 20 Year Mold & Mildew Resistance
    • Water Resistant in 30 minutes
    • 100% Waterproof
    • Maximum Flexibility
    • Shrink and Crack Proof
    • Safe for Incidental Food Contact
    • Lifetime Guarantee

Suggested Uses:

Ideal for caulking and sealing:  
    • Showers
    • Backsplashes
    • Tubs
    • Countertops
    • Toilets
    • Fixtures
    • Sinks 
    • Repairing loose tiles
Adheres to:  
    • Most plastics and rubbers
    •  Cultured Marble
    • Glass
    •  Painted surfaces
    • Ceramic
    •  Fiberglass
    • Porcelain
    •  Most metals (see How to Use section)
    • Non-oily woods
 

Color Available:

  • White

  • Clear

SKU Product Code Unit Size Color Case Pack Weight Dimensions Cases/ Pallet
7079874832 74832 290 ML WHITE 12 8.02 11.25'' x 2'' x 2'' 108
7079874833 74833 290 ML CLEAR 12 8.02 11.25'' x 2'' x 2'' 108
SKU SDS SDS
  • 7079874832 - 290ml - White
  • 7079874833 - 290ml - Transparent
English French

Surface Preparation & Application:

  1. Remove old caulk from surface. Prepare a clean, dry surface which is free of loose debris, dust, dirt, soap, oil or grease.
  2. Cut nozzle at a 45º angle to desired bead size.
  3. Puncture inner foil seal.
  4. Load cartridge into caulk gun.
  5. Apply sealant to surface, pushing sealant ahead of nozzle.
  6. Fill gap with sealant.
  7. For professional results, smooth bead of sealant with a finishing tool.
  8. Clean up excess uncured sealant from surface and tools with mineral spirits. Excess cured sealant must be cut or scraped away. Wash hands with soap and water.
  9. At 22°C & 50% relative humidity, sealant is water resistant at 30 minutes & reaches full cure in 24 hours. Low humidity may slow cure.
  10. Reseal cartridge for future use.

 For Best Results:

      • Not paintable. Paint surfaces before sealing.
      • Application temperature is between -37°C to 60°C.
      • Not recommended for continuous underwater use, below grade use, use on wet surfaces, oily woods,   stovepipes or chimneys. Not for fireplace applications, tuck pointing, butt joints, structural glazing or repairing surface defects.
      • Not recommended for use on cementitious materials or surfaces that might bleed oils, plasticizers or solvents. Substrates made of methylmethacrylate, polycarbonate, polypropylene, polyethylene and polytetrafluoroethylene do not allow for best adhesion and compatibility with sealant. Try test area before using.
      • Not recommended for use on brass, copper, magnesium, zinc, iron, galvanized metals or other surfaces prone to attack by weak acids.
      • Do not use where abrasion and physical abuse are encountered.
      • Joint width should not exceed 13mm. If joint depth exceeds 13mm, use backer rod material.
      • Store in temperatures below 32°C in a dry place.