DAP® KWIK SEAL ULTRA™ Premium Kitchen and Bath Siliconized Sealant

DAP® KWIK SEAL ULTRA™ is a high-performance siliconized kitchen and bath sealant that repels water, stains and dirt. It has a lifetime mould and mildew guarantee so the sealant stays looking fresh and new. KWIK SEAL ULTRA™ is 100% waterproof and crack proof. It can be exposed to water in as little as 4 hours after application without washing out.  It is safe for granite and marble, cleans up easily with water and is low in odour.  Interior use.

 

Features & Benefits:

 
  • Easy clean
  • Lifetime mould & mildew guarantee
  • Repels water, stains & dirt
  • Safe for granite & marble
  • Crack & stain proof
  • Water-ready in 4 hours
  • Sealant stays looking fresh & new
  • Easy water clean up & low odour
  • 100% waterproof
  • Interior
   

Suggested Uses:

 

Ideal for sealing:

 
  • Tubs
  • Toilets
  • Sinks
  • Fixtures
  • Backsplashes
  • Tile Repair
  • Showers
  • Cracks and Joints
  • Countertops
 
   

Adheres To:

 
  • Ceramic/Porcelain
  • Metal
  • Glass
  • Drywall
  • Most Plastics
  • Fiberglass
  • Painted Surfaces
  • Granite, Cultured Marble & Natural Stone
  • Wood
 
   

Performance Characteristics:

 
  • Repels water, stains and dirt
  • Safe for granite & marble
  • Not paintable
  • Easy water clean up and low odour
  • Crack & stain proof
  • Lifetime mould & mildew guarantee
  • Water-ready in 4 hours
  • Sealant stays looking fresh & new
  • 100% waterproof
 

Color Available:

  • White

  • Biscuit

  • Clear

SKU Product Code Unit Size Color Case Pack Weight Dimensions Cases/ Pallet
7079874820 74820 300 ML WHITE 12 8.23 2''x2''x11.25'' 108
7079874821 74821 300 ML CLEAR 12 8.16 2''x2''x11.25'' 108
7079874822 74822 162 ML BISCUIT 15 5.59 1.5''x2.38''x9.75'' 120
7079874823 74823 162 ML WHITE 12 5.60 1.5''x2.38''x9.75'' 120
7079874824 74824 162 ML CLEAR 15 5.55 1.5''x2.38''x9.75'' 120
SKU SDS SDS
  • 7079874820 - 300ml - White
  • 7079874823 - 162ml - White
  • 7079874822 - 162ml - Biscuit
English French
  • 7079874821 - 300ml - Clear
  • 7079874824 - 162ml - Clear
English French

For Best Results:

  • Apply in temperatures above 4.5°C.
  • Not for continuous underwater use, high-temperature surfaces or surface defects.
  • Joint size should not exceed 1cm wide by 1cm deep.  For joints deeper than 31cm, use backer rod. 
  • Store product away from extreme heat or cold.

Surface Preparation & Application:

  1. Surface must be clean, dry and free of all old sealant, dirt, dust, debris and grease. Rubbing alcohol is recommended for removing soap film and soil.
  2. Remove cap (from tube). Cut nozzle at a 45° angle to desired bead size.  If using the cartridge, puncture inner foil seal and load into caulk gun.
  3. Fill gap with sealant, pushing sealant ahead of nozzle.
  4. For a neat finish, smooth bead of sealant with a finishing tool.
  5. Allow sealant to dry for at least 4 hours before exposing to water. Sealant reaches full performance in 24 hours.
  6. Clean up excess uncured sealant with damp sponge before it skins over. Scrape or cut away excess cured sealant. 
  7. Regular cleaning of surrounding areas is suggested.
  8. Reseal tube/cartridge for future use.